1. To save time
Because of large angle transporting, thus can be shortened the
horizontal length and save the space of laying area.
2. Strong transporting capacity
Compared with common conveyor belt, with large carrying cross
section, has stronger transporting capacity than same width
3. Without sidewall plate
Because without sidewall plate, thus avoid the local abrasion.
4. Impossible to use small roller
Impossible to use the traditional size of small roller.
5. Because the baseband uses special canvas core to improve the
canvas, then improve the anti-broken ability of belt at the same
6. The sidewall plate and diaphragm are adhesive with baseband
through heat vulcanization method, thus ensure the bonding
Baseband is consisted of upper rubber, lower rubber, core and
transverse rigid layer. Upper rubber thickness is 3-6mm, the lower
rubber thickness is 1.5-4.5mm. The core supports tensile force, the
core are: Cotton(CC), Nylon, EP. To improve the transverse rigid
ability, it has added special reinforced layers in the core, named
transverse rigid layer. Baseband has the same width with common
The cleat is produced by fiber load materials. With large
anti-shock ability and impact resistance, thus avoid the distortion
of stress. The cleat has T, TS, C, TC, TCS five types. TS and TCS
types are mosaic pattern. The conveyor angle is small than 40° ,
using T or TS cleat; The conveyor angle is bigger than 40° , using
C, TC or TCS cleat.
Corrugated sidewall plate:
According to the carrying capacity, there are three types
corrugated sidewall: Light type(N), Medium type(S), Heavy type(ES).