Sign In | Join Free | My frbiz.com
frbiz.com
Products
Search by Category
Home > Hydraulic Breakers >

CT88KA PLC Conversion of pneumatic die forging hammer

Country/Region china
Company China Forging Machinery Co., Ltd
Categories Sheet Metal Protective film 
Telephone 0086-513-88368808
ICP License Issued by the Chinese Ministry
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    CT88KA PLC Conversion of pneumatic die forging hammer

    CT88KA PLC Conversion of pneumatic die forging hammer


    Description:
    Its appearance is same as CT88K PLC fully hydraulic die forging hammer.
    Its driving system is fully hydraulic driving system designed and made by CFM, fixed on columns with
    elasticity anti-vibration cushion block. This system uses advanced taper valve control technology,
    combine cylinder transit technology, double anti-leakage and hydraulic integrating technology, simple
    system structure. And Key hydraulic components and seals are imported.

    Its striking system use separated hammer body structure, using old pneumatic hammer columns and
    anvil to modify, and columns are connected to anvil by bolts.


    Its guiding is using the steel X-shape guide rails fixed on the columns by bolts. Extending line of
    contacting surface of guide rails and ram crosses on the ram center, which cannot effect guide clearance due to heating, and clearance between ram and guide rails can be adjusted to be small to assure die
    matching. Radial X-shape wide guide structure make sure ram guiding clearance will be not changed
    due to heating.

    And this guide rails lubrication is automatic and exclusive, whose lubrication oil volume can be preset by operator according to machine requirement, and its level can be monitored. Once there is problem on
    lubrication system or level too lower, there will be alarm on touch screen and this system buzzer with
    alarm.

    Conversion of existing steam (air) the die forging hammer with fully hydraulic driving system is with very obvious economic effect and much cheaper than a new fully hydraulic die forging hammer. If the pump house was not considered, the hydra-pneumatic hammer may be cheaper than the fully hydraulic
    hammer. But in fact if the pump house and the piping system should be calculated together, the steam die hammer conversion will almost be equal. If maintaining cost is considered again, the pneumatic die hammer numerical control transformation l cost will be lower.

    Striking program is easy to input,no need skilled computer engineer,and even semi-skilled worker is OK. When hammer working, control system can check oil temperature, pressure, cleanness and position and then numerical display. Once problem, the malfunction alarm light will be on and the malfunction
    position and character will be on touch screen.

    Main features:
    01) Program control, numerical input, simple operate;
    02) High integrated hydraulic control system, accumulator fixed directly on main valve block without any pipe connecting, improve hydraulic system efficiency and easy for maintenance
    03) Advanced taper valve control, fast response, good sealing and not easy to inner leakage;
    04) High response speed and high reliable redundancy design;
    05) Hydraulic driving system and power system assembled on top separately, no hydraulic pump station on floor;
    06) Touch screen man-machine interface and automatic malfunction diagnosis and alarm, easy for
    machine operation and maintenance;
    07) Safety design for inner accumulator and pipeline assembly;
    08) Swaying combine oil cylinder and thin piston rod flexible design;
    09) High and low pressure double anti-leakage design;
    10) Long ram structure can improve working accuracy;
    11) Striking energy and steps can be preset at will, no surplus striking energy can reduce striking noise
    and improve die life;

    12) Slow up and down in the case of releasing hydraulic system pressure to make die changing safety;
    13) Ram buffer is inner hydraulic buffer, to make sure safety and effective;

    Product Tags:

    double arm z blade mixer

      
    Quality CT88KA PLC Conversion of pneumatic die forging hammer for sale
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: China Forging Machinery Co., Ltd
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0