1. UV-400 weather-proof treatment on the surface to prolong
2. Weather-proof materials to administer strict control to ensure
3. More advantages than other PC sheets, such as impact resistance,
weather-proof capability, flame retardant.
4. Temperature endurance to resist high temperatures.
5.. Able to transmit and reflect light
1. Light, canopy, greenhouse, ceilings, billboard, heat forming
Min. bending radius(mm)
1 - 8
Sold flat surfaceEmbossed surface
Prototype or customized order
Cold bent: thickness *180 times or heat bent
4 - 8
Only thermoplastic bending is acceptable
Examples of UV400 via other PC sheet
After five years of exposing the sheet under the sun, yellowish was
kept under 3%, maintaining original performance while conventional
PC board after irradiation by UV light from sunshine has lost its
surface transparency, become foggy and yellowish with poor
performance, For outdoor usage, yellowish exceeded 7.5% which can
be viewed visually.
Anti-UV PC board remain its characteristics of clearness,
transparent effect which indicates high quality of weather
resistance. Conventional PC board will be discolored, foggy and
loss of its transparency after a year.
UV-400 sheet likes :
Lukewarm water, when cleaning with a little household detergent
added and a non-abrasive cloth or sponge, just wipe, don't rub.
UV-400 sheet dislikes:
Being cleaned dry, which can scratch it, fluffy or rough cloths.
UV-400 has a fairly soft surface in comparison to glass and even
UV-400 sheet is not partial to solvents or oil-based products such
as putty. It is best to use a low modulus, neutral cure silicone
sealant for glazing polycarbonate.
Polycarbonate is notch sensitive.
Being heat formed without pre-drying.