Categories | SMT Assembly Machine |
---|---|
Brand Name: | Seamark ZM |
Model Number: | ZM-R7220A |
Place of Origin: | MADE IN CHINA |
MOQ: | 1 |
Payment Terms: | T/T |
Supply Ability: | 10+pcs+1year |
Delivery Time: | 5 weeks |
Product name: | Seamark |
Usage: | smt machine,pcb assembly line |
Quality: | 100% Tested, top quality |
Lead time: | 30 days |
Model no: | ZM-R7220A |
Seamark ZM-R7220A
Features:
●Suitable for rework of packaged components such as BGA/POP/CSP/LED/QFN/CSP/LGA/Micro SMD/MLF (Micro Lead Frames)
Independent three temperature zone temperature control system:
1. The upper and lower temperature areas are heated by hot air, and
the IR preheating area is heated by infrared, and the temperature
is accurately controlled at ±3°C. The upper and lower heaters can
be heated from the top of the components and the bottom of the PCB
at the same time, and multi-stage temperature control can be set at
the same time; IR The preheating zone can adjust the heating area
according to the actual requirements, so that the PCB board can be
heated evenly. The maximum temperature of the upper and lower
temperature zones can reach 450℃, and the maximum temperature of
the IR preheating zone can reach 300℃.
2. The BGA chip and the PCB board can be heated locally with hot
air at the same time, and supplemented by a large-area infrared
heater to preheat the bottom of the PCB board, which can completely
avoid the deformation of the PCB board during the repair process,
and the support bar or thimble The effect is better; by choosing
the upper temperature zone or the lower temperature zone, the upper
and lower temperature zones can be used alone, and the energy of
the upper and lower heating bodies can be freely combined.
3. High-precision K-type thermocouple closed-loop control and PID
parameter self-tuning system are selected; it can display seven
temperature curves and store multiple sets of user data at the same
time, and has the function of instantaneous curve analysis; the
external temperature measurement interface realizes precise
temperature detection, The temperature curve of the actual BGA
collected can be analyzed and calibrated at any time.
Precise optical alignment system:
The image of the optical alignment system of this machine is clear,
the maximum can be enlarged to 200 times of the components, and the
placement accuracy can reach ±0.01mm. And it has the functions of
splitting two colors, zooming in, zooming out and fine-tuning, and
is equipped with a 15″ high-definition LCD display. Switch to
"Place" mode, which can realize the function of automatic alignment
and placement.
Superior safety protection function:
This machine has passed CE certification and is equipped with
emergency stop switch and automatic power-off protection device for
abnormal accidents; after welding or desoldering, it has an alarm
function. When the temperature is out of control, the circuit can
automatically power off, and it has double over-temperature
protection functions. The parameters are protected by password to
prevent arbitrary modification and other safety protection and
fool-proof functions. It has superior safety protection function to
ensure that the PCB and components are not damaged and the machine
itself is damaged under any abnormal conditions.
During operation, each heater is automatically monitored in real
time. When an abnormal accident occurs, the relevant sensor will
send the fault signal to the PLC, and the PLC will automatically
close the relevant output channel and display the fault status on
the touch screen.
Equipment Parameters:
Power | AC 220V±10% 50/60 Hz |
Total power | Max 5300W |
Heater power | Upper temperature zone 1200 W, lower temperature zone 1200 W, IR temperature zone 2700 W |
Temperature control | Independent heating control system V2 (with software copyright) independent temperature control up and down, the temperature accuracy range is ±3℃ |
PCB fixing method | V-shaped card slot + universal clamp + laser red dot positioning |
Optical alignment accuracy | ±0.01mm |
PCB size | Max 410×370 mm Min 6×6 mm |
Preheat zone size | Max 280×380mm |
Applicable BGA size | Max60×60mm Min 2×2 mm |
Temperature measurement interface | 1 pc |
Machine size | L640×W630×H900 mm |
Machine weight | 70kg |
Main material | Panasonic PLC + Panasonic CCD optical alignment system + Korea Shilin (CNB) industrial camera + American imported Omega temperature measurement system + German heating core + Taiwan imported heating brick + Dalian Institute of Technology temperature control module + Taiwan high-precision suction rod System + Japan Zuo Teng vacuum pump + Taiwan Shangyin precision ball guide, etc. |
FAQ
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support
and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Q: What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.
Q: What your main customers?
A: Huawei,Foxconn,Vtech,Sumida,Kemet,Vishay,Bosch,Canon.
Q: Why choose us?
A: Leading SMT Supplier in China; Trade assurance to USD 560,000+;
Professional after-sales service team.
Global Service
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Help