SUS304 Spin flash drying machine for drying ferric oxide , capacity
1~10ton per hour ,heating source gas furnace(XSG-spin flash dryer)
The flash dryer is widely used in the dispersion and drying of
granular, powdery, paste-like and filter cake-like false
agglomerates in the chemical, pharmaceutical, building materials,
food, feed, and other industries. The flash dryer has the
advantages of the small occupied areas, low energy consumption,
high thermal efficiency, and continuous mass production. The flash
dryer body is provided with a rotary cutting device, and the dry
material is subjected to shearing, rotating, collision, friction,
etc., so that the material is pulverized and refined, and is highly
dispersed, thereby achieving the effect of efficiently and rapidly
evaporating water. The dryer is equipped with an air filter to
achieve the cleanliness of the hot air and to provide production
conditions for the hygiene requirements of the food industry. The
machine sets the cyclone separation and collecting materials. In
addition, the bag dust removal receipt is added to increase the
material recovery rate. It can improve the economic efficiency of
enterprises. The dryer can be customized according to user needs.
Flash dryer is also the main equipment for drying bean dregs to
make cat litter. Making litter from bean waste can be used to mask
the smell of cats' urine and feces. Okara cat litter is chosen by
more cat litter manufacturers for its excellent quality and
moderate price. However, most of the bean dregs in the market are
wet bean dregs, with a water content of more than 60%, which cannot
meet the raw material requirements for producing bean dregs cat
litter. This forces enterprises to further process the bean dregs,
further improve the quality of the bean dregs, and dry the wet bean
dregs to dry bean dregs with a moisture content of 9-13%, which
meets the raw material requirements of the bean dregs cat litter.
The surface of cat litter made from bean dregs after being dried by
a flash dryer is mostly dense with dense pores and very light. It
has a good water absorption and deodorization effect, is non-toxic
and non-polluting, it will not flow into the sewer and will be
blocked, and it is very convenient to transport.
The flash dryer consists of a dry main engine, feeder, heat source
device (hot air furnace or steam), air filter, air blower, cyclone
separator, bag filter, and induced draft fan. The hot air
tangentially enters the bottom of the dryer and is driven by the
agitator to form a powerful rotating wind field. The paste material
enters the dryer by the screw feeder. Under the strong action of
the high-speed rotating stirring paddle, the material is dispersed
under the action of impact, friction and shearing force, the block
material is rapidly pulverized, and it is fully contacted with hot
air and heated, and dry. The dehydrated dry material rises with the
hot gas flow, and the classification ring intercepts the large
particles. The small particles are discharged from the center of
the ring to the outside of the dryer and are recovered by the
cyclone separator and the dust collector. The dry material is not
dried or the bulk material is subjected to centrifugal force, fell
to the bottom and was crushed and dried.
1. The organic combination of swirling, fluidizing, spraying and
pulverizing and grading techniques.
2. Compact equipment, small size, high production efficiency,
continuous production, and realize "small equipment, large
3. Large drying strength, low energy consumption, and high thermal
4. The material has short residence time and well-finished product
quality, which can be used for drying heat-sensitive materials.
Negative pressure or micro-negative
5. Pressure operation, good airtightness, high efficiency and
elimination of environmental pollution.
Foodstuffs: soy protein, gelatinized starch, wine trough, wheat sugar, wheat
Organics: Atrazine (pesticide pesticides), lauric acid, benzoic acid,
benzoic acid, bactericidal dan, sodium oxalate, cellulose acetate,
organic pigments, and the like.
Dyes: antimony, black iron oxide, indigo pigment, butyric acid,
titanium hydroxide, zinc sulfide, various the nitrogen dye
Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide,
barium carbonate, antimony trioxide, various metal hydroxides,
various heavy metal salts, synthetic cryolite, and the like.
|Model||Inner Diameter(mm)||Air Volume(m³/h)||Evaporation Capacity(kg/h)||Total Power(kw)||Max Height(m)||Covering Area (m²)|
1. The evaporation of water is the water that evaporates every hour
when the inlet air temperature is 180 °C and the outlet air
temperature is 80 °C.
2. In addition to the above models, special design and
customization can be made for users.
3. The above-installed capacity is standard, and the materials have