Rubber Tile Machinery with Steam Heating and PLC Automatic Control
Four Cavities Rubber Tile Vulcanizing Press Machine With Electric
Rubber Tile Curing Machine
Rubber Tile Vulcanizing Press
Rubber Tile Vulcanizer
Rubber Tile Machine
I. Simple Introduction
- Material of steel plate:
We use hight quality carbon steel Q-235(produce by Jigang Group
Co.,Ltd which is a famous company) ,more thicker than other
supplier,after shot blasting ,smooth, it is strong enough than
- Weldment of frame : world technique
Welded together as a whole part,Stewing fire treatment after
(Carbon dioxide gas shielded welding,alloyed welding wire).
submerged arc welding, VSR treatment after weldment.
the material of plunger is Chilled cast iron, after
polishing,grinding treatment and resist compression test,make the
surface smooth,and anti-abrasion.
- Heating way&precision temperature control:
Steam ,oil or Electric (We use high quality heating pipe to keep
range of temperature:0-300 °C (can be adjustment if you need 400 °C
,we can do it )
Plate temperature tolerance: ±0.1°C (very precise)other factory just is ±3°C
Also we can produce the machine with water cooling system.
- Hydraulic system: (PLC control)
the professional hydraulic components, stable and reliable and
quality .Pressure sensor control system pressure and never off
We use OMRON,SIMENS CHNT , SCHNEIDER ect brand electric parts.
- There are more advanced technical information as our core patents,and not showed in the description,please send email to us.
II. Technical Details
|Nominal clamping mould force||1400KN||400KN||250KN|
|Max working-oil pressure||20||16||16|
|Hot plate size||1200*1200||600*600||500*500|
|Hot plate space||400||150||150|
|Max plunger stroke||400||600||500|
|Heating mode||Steam/electric heating||Steam/electric heating||Steam/electric heating|
|Hot plate pressure per unit area||1.0||1.35||1.0|
|Machine operation space(LXW)||3000*3000||2000*2500||2200*3500|
|low voltage electrical||CHINT||CHINT||CHINT|
|number of operators||2 persons /3sets||2||2|
|Every time the vulcanizing time||4-10min||4-10min||4-10min|
|Note||Column type||Column type||Column type|
III. Detailed Pictures For Reference
IV. Other Informations for Your Reference
Rubber tile is made of two layers of different rubber granulates,
color granulates are fine granulates or rubber wire in surface, the
bottom layer is thick rubber granulates or rubber wire.
Following is the main processes:
1.conching: Put the rubber granulates and stain into the stirring barrel to
stir,and then put into the adhesive to stir,this process requires
for 4-6 minutes( because the adhesive is easy to cure, so stir it
when use ).
2.Weighing raw materials: weight the rubber granulates stirred, according to the granulates'
thickness requirement of the tiles .
3. Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it
by trowel. Firstly paving the surface rubber granulates which is
fine and color, then the thickness and black.
4. Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to
vulcanize, the time of vulcanization accord to the thickness of the
rubber tiles, in general, 3-8inutes finished. After that, Mold
separate automatic, then remove floor tile on the shelves to dry.
5. Inspecting: Inspect the surface of the floor tiles formity, no aberration, no
flaw, line with the product quality.