Automatic cap lining machine can punch the liner to some mode and
then finish capping to avoid the manual pollution and improve the
product efficiency as well. It is mainly applied to packaging,
medicine, food and so on industries.
The machine isused to producecap liner, which was produced by TPE
After high temperature plasticizing molded into cap, make inside
cushion with cap together.
The development of this machine could greatly increased the
and effectively solves the inner pad health and leakage problems.
The advancement of this machine is small-size, high-produce
efficiency and easy-operated.
The cap liner made by this machine can be even more smooth and
beautiful, it also will be accord with national food
hygiene standards for the good leak proof performance and strong
PLC controller, panel operation, stable running and easy operation,
24-hour running available
Automatic checking to remove inverted cap
Rotary positioning for accurate capping
Punching device to achieve different capping by changing mould size
Calculation function, liner shortage and tie-in checking function
VDD: 220VAC±10%, single-phase, 50/60Hz, total power: 1KW
MPa: 0.6-0.8MPa, cfm: 300L/min at most;
Narrow Volume thickness (mm): 0.2-1.0, plate volume in (mm): 76,
out (mm): 500 at most
Punching Speed (unit/min): 0-90 (liner with 22mm diameter, 0.3mm
thickness and 26mm diameter cap as the testing medium, others
according to actual usage)
Application for cap diameter (mm): 18-110, height (mm): 10-25.
Customized machine is for your special size and form capping.
1. Dispense device
2. Inhaler(filtration sterilization core included) adding
3. Liner unfold grip device
4. Upper vibratory feed unit or climbing deliverer
The Power of Extruder Heating Ring
The Power of Extruder Electro-Motor
Installed Electrical Power
15 KW (50HZ)
Consumed Electrical Power
Compressed Air Consumption(Approximate)