Light Weight Fused Cast AZS Refractory Brick Chrome Zircon Mullite
The dense part is made of fused mullite, fused corundum and Guangxi
white clay as raw material and the lightweight part is made of
mullite hollow ball, cyanite, flint clay and Guangxi white clay,
shaped in high pressure, sintered in high temperature.
The lining design about the rotary kiln of hazardous waste is
two-layer masonry, the inner insulation layer is made of
lightweight clay brick, and the refractory layer is made of dense
refractory brick. It can no longer be used, when the dense
refractory brick is worn to 120mm.
In order to solve this problem, our company designs the Cr- Zr
corundum compounding brick. The refractory brick has 180mm overall
(generally designed according to 300mm), when the refractory brick
is worn to 120mm which can continue to use 3-5 months.
High temperature resistance, good abrasion resistance, good thermal
shock resistance, good erosion resistance to sulfur, chlorine,
fluorine and basic salts, and low thermal conductivity
Used for the lining of rotary kiln for hazardous waste and high
Chrome Zircon Mullite Bricks
Chemical Component %
|Al2O3||≥ 82||≥ 40|
Bulk Density g/cm3
Apparent Porosity %
Crushing Strength MPa
|≥ 120||≥ 30|
Refractoriness under Load (0.2Mpa) ℃
|≥ 1700||≥ 1400|
Thermal Shock Resistance (1100℃, water cooling) Cycles
WHY CHOOSE US:
Please just spare your precious 30 seconds and you can eliminate your doubts.
No.1: We are manufacturer of refractory materials, so we can provide you professional solutions about your problems.
No. 2: We have been built for more than 30 years. Over the past 30 years, we have accumulated a lot of customers
all over the world.
No. 3: We have good connection with shipping company and forwarders, as well as the local customs
and port authority. It ensures that we can deliver on time.
No. 4: We maintain a highly conscientious and professional attitude to solve your problems.
No. 5: We can provide you the best price, and what you will get
from us is our best effort in service and the hospitality that you
are willing to become our friend.
1. When Jansincere Company established?
2. How many staffs in your factory?
About 500, including including 23 managers, 42 technicians, and 8
qualified installation engineers.
3. What’s your main products scope?
Our main products are dense refractory bricks and monolithic
refractories, including alumino-silicate refractories,
magnetite-alumina refractory, special high grade refractories,
refractory cement, castable refractory and so on.
4. Do you provide samples?
Standard size sample is free, but the air freight is collect or you
pay us the cost in advance.
5. What’s your MOQ?
Normally we don’t have particular requirements on the MOQ. But we
will charge the mold cost when the quantity of per shape is small.
6. What’s your warranty?
We are very confident in our products. Any quality issues, we will
deal with it immediately.