Customized Platform Type Vertical Guillotine Cutter Hydraulic
Cutting System Rubber Cutting Machine
I. Technical Details
|Oil Cylinder Pressure||80KN||125KN||160KN||50KN|
|Cutting Stroke Time||14-18S||16-18S||16-20S||8-10S|
|Overall Size (mm)||1800x500x2150||1800x500x2150||2200x500x2150||1600x1000x1300|
II. Main material and advantages
● Cutting knife: use high quality alloy 9CrSi, wear-resistant,
sharp, high hardness.
● Oil cylinder: use professional high pressure cylinder seamless
Piston rod adopts 45# steel refined grinding processing after
plating, high wear resistance, good toughness.
Sealing ring is with high wear resistance and oil resistance of
high quality rubber production, long life, good sealing.
● Frame: Using national standard channel steel welded together, high tensile performance, no deformation. There’s protective pad
installed at the bottom to prevent the lead edge damaged. It can be
duty-cycle operation after heating.
● Both sides of the cutter are installed with a three-sided closed
● The hydraulic pump station is installed on the protective mesh.
The protective mesh bracket has sufficient strength to support the
hydraulic pumping station.
● Cutter upper and lower stop limit switch adopts push type.
● We could design the machine according to customer’s requirement.
III. Pictures For Reference
IV. Our service
1. Our team could design the most reasonable machines for the
customers according to the customers' products and workshop size.
2. We could provide the detailed drawings of the machines for the
3. Test running: The above machines are all passed inspection of
3~5 hours of full load operation before leaving our factory. And we
will take the video and send it to you for inspection. You can use
it directly thus saving the time of test-run and expense. And we
also warmly welcome to our factory to inspect and test running.
4. If needed,our engineer could install the machines for the
customers and give training for their workers.
5. The instruction books of installation and operation will be sent
it to the customers together with the machines.
6. We provide 24-hour technical service for the customers. The
email address for technical service is firstname.lastname@example.org
7. Warranty: 12 months after installation, if our machines have any
problems, please feel free to contact me. We will solve it for you
as soon as possible, and give you the best services.
1. Delivery time of the rubber machines?
--This is specially designed machine according to your specific
From engineer designing to production completion, it needs about 25
to 35 days.
2. What does your factory do regarding quality control?
-- We pay much more importance to quality control from the very
beginning to the end of production.
Every machine will be fully assembled and carefully tested before
3. What's the packing for the machines?
-- Usually, The machines are packed by the stretch film first, and
then will be packed with wooden cases. We will also fix the
machines in order to prevent the machines damaged during the
shipment. We also could pack the machines according to the
4. Are you able to give installation and commissioning overseas?
How long time will it take?
--Yes, we can supply overseas service and technical support but
customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
5. How can I trust you to deliver the right machine as I ordered?
--We will absolutely deliver a good quality machine as we discussed
and confirmed in the order. We will provide the detailed drawings
for the customers after the order is placed. And we will
manufacture the machines according to the final detailed drawings.
The core of our company culture is innovation, quality, integrity
and efficiency. Also we have had much good cooperation with world
famous rubber production manufacturers. If you come to our factory,
we can show you're the user around us.
6. How could we go to your factory?
--We are located in Qingdao City, Shandong province, China. The
name of airport is Qingdao Liuting airport. We will pick up you at
If it's very late when the customers arrive at the airport,we also
have cooperating hotels near the airport. In order to make the
customers have a good rest,we will arrange the hotel for the
customers and the hotel customer service will pick the customers up
at the airport.
7. How long will it take from the airport to your factory?
-- It will take about one and a half hours from the airport to our
factory if there's no traffic jam or bad weather.