Large Loading Capacity Corrugated Sidewall Belt Conveyor System
Description of Corrugated Sidewall Cleated Belt Conveyor :
Sidewall cleated belt conveyor is continuous transporting equipment
of loose bulk materials such as coke, coal, limestone, sand and
gravel. It adopts high quality conveyor belt with corrugated
sidewall and horizontal baffle. Sidewall belts are used to convey
material up inclines. The sidewall increases the carrying capacity
of the belt and prevents product from falling off the edges of the
belt. Hot vulcanization provides a 5x greater adhesion between the
belt and sidewall, eliminating the need for bolting the sidewall to
the base belt. Greater adhesion also prevents the sidewall from
lifting and separating from the base belt, extending the belt life.
Application of Corrugated Sidewall Cleated Belt Conveyor:
Sidewall cleated Inclined belt conveyor systems is mainly used in
arbor, metallurgy, mining, electricity, coal, foundries,
construction, food, cement works, fertilizer, etc.
Specification - Techincal Parameter :
|Sidewall Height (mm)||Conveyor Quantity at certain angles Q(m3/h)|
1.low maintenance cost.
2.Large transport capacity, and it can avoid material spilling
3.The belt can facilitate switching from horizontal to inclined
conveying and from inclined to horizontal conveying.
4.It saves a lot space as it allows material conveying at 0-90
5.The sidewall belt conveyor is widely used in coal, food,
building, chemical, water and electricity and metallurgy industry.
Incline Corrugated Sidewall Cleated Rubber Belt Conveyor
The horizontal loading section a deflection wheel bends the belt
into the feeding of the bulk material takes place on a mostly
horizontal feed path, where the side wall belt is supported by
loading impact idlers. The feeding of the conveyed material can be
achieved by direct feeding from a hopper, over a chute, a feeding
belt or a feeding pulley. The selection of the optimum feeding
station depends on the properties of the bulk material and the belt
speed of the vertical conveyor. The upward and downward strands are
encased from the bottom to the top. Substructures or support
rollers are not necessary in this section.
The vertical section leads over a deflection curve into the
horizontal discharge section. The deflection curve is made up of a
number of high specification pulleys. These pulleys experience the
vectored load of deflecting the belt tension from vertical to
At the drive pulley, the bulk material is discharged and the belt
is returned to the back going strand. Depending on the bulk
material properties, the drive pulley is followed by a beater wheel
for belt cleaning in the return side. The beater is self-driven.
Material that fails from the belt goes into the main delivery
chute. Lateral deflection wheels turn the belt from the horizontal
back to the vertical.
We can choose the most suitable the machine according to customer
1. What is the conveying material and its physical characteristics?
such as bulk density, feeding size, temperature, mositure content
2. What is the processing capacity of the conveyor?
3. What is the inclination angle of the conveyor?
4. What is the lifting height (distance between inlet and outlet)?
5. What is the length of horizontal section?