Burn out some of the material through light energy, and show the
patterns, characters, bar codes, and so on.
Metal Marking Machine samples
The packaging industry and the electronic communications industry
of the mobile phone shell, electronic components.
Metal Fiber Laser Marking Machine parameter
|type||Metal marking machine|
|Laser power||10/20/30/50 w|
|Minimum line width||0.01mm|
Graphics, text, bar codes, two-dimensional code,
date, batch number, serial number
About avoiding condensation
Prevention of laser crystal and LD cavity surface condensation
The laser system is forbidden to work in a high humidity
environment, and the customer should ensure that the ambient
humidity is less than 60%. When the temperature difference between
the laser crystal and the ambient temperature is too large (greater
than 10 degrees), it will lead to the condensation of laser
crystals. Condensation will lead to the decrease or damage of the
power of the laser system. Therefore, when the ambient temperature
is far greater than the set temperature of the water tank (greater
than 10 degrees or more), it is strictly prohibited that the laser
system is in a single boiled water cooler and the laser head is not
working. In this state, the following steps are recommended.
When starting, open the chiller first. When the temperature of the
refrigerator is below 30 degrees, start the power and slow the
current to about 10A. When the temperature of the cooler is
displayed at the working temperature (18 C or so), the current will
be adjusted to about 35A.
In the shutdown, the current slows down to about 10A and stops the
power output, closes the power supply, and then closes the water
cooler as soon as possible. If the work is not done at the maximum
current, the cooling temperature of the refrigerator can be
adjusted to a higher temperature (but not higher than 25 degrees).
We must use laser system equipment in the specified environment
(the South operation environment should be equipped with air
Laser processing ,no interaction force between workpiece. It has
the advantages of no contact, no cutting force and little heat
influence.ensures the original accuracy of workpiece. At the same
time, can mark on variety of materials surface very good and be
What is the laser marking machine without laser output? When this
problem arises, we usually exclude the following several steps to
solve the problem and let the laser marking equipment return to
normal as soon as possible and produce normally.
The first step is to see if it is possible to make a mistake in the
laser marking machine. If it is, turn off the machine and try it
The second step: a careful observation of what abnormal laser
marking equipment has. The abnormal content mainly includes the
following: the work of the voice, such as vibration lens voice,
voice alarm control box, the sound of the equipment itself, as well
as the semiconductor laser marking machine water machine alarm
sound; abnormal voltage, simple to use a multimeter to measure
voltage, generally low, can also cause no laser; computer software
and computer are poisoning, slow boot, and boot parked in an
interface for a long time move.
Laser's space control and time control are very good. It has great
freedom to process object's material, shape, size and processing
environment. It is especially suitable for automatic processing and
special surface processing. And the processing mode is flexible,
which can meet the needs of the single design in the laboratory,
and also meet the requirements of the industrial mass production.
High quality and quick technical service he equipment package is
guaranteed to meet the requirements of moistureproof, rain proof,
antirust, anticorrosion and shock proof, and the identification is
clear and unmistakable, so that the articles are safely and
promptly shipped to the site.
Packing and shipping
we supply by air, more fast for shipping, Two days to start the
installation work, at the same time, our company in accordance with
the pre-developed, approved by the user's production plan to ensure
follow-up product manufacturing, supply and installation of
continuity to ensure timely completion of the production of the
tender products And install.
|Delviery time||7-15 working days|
|Type of shipping||Express,air or sea|
|Terms of payment||T/T,credit card,western union,paypal|