RAL7035 Plastic Injection Molding Products Light Grey M22 Plastic
Grey cap injection molded part with threaded inside hole is made
from nylon material ( PA 66 ) , there is a start gear hole in the
centre of top , and inside machine threads for fixing cap on
another part .
Injection molded cap part has grooves on side surface , it is easy
to screw cap out or in by hand .
This plastic injection molded cap part is designed for
communication device .
Plastic injection molded cap part is made from Nylon with grade 66
, RAL 7035 color .
|Start hole diameter||12|
1 , Wear resistance
2 , Good self-lubricant
3 , High mechanical property
4 , Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃
and thermal deformed temperature is up to 250℃ when parts with
glass fiber .
5 , Perfect elongation
Elongation at break is 2.2% according to ISO 527 testing method .
6 , Corrosion resistance
7 , Good insulation
Specific volume resistance is 1.83×1015 and resistance to high
breakdown voltage support part to be good insulated .
8 , Resistant impact
60 – 80 KJ/M2 normally .
9 , Resistant fire
Generally , the fire resistance is UL94V-2 and UL64V-0 for special
10 , Resistance to low temperature
Parts can be workable at -30℃
|Tensile strength MPa||60～80|
|Elongation at break %||2.2|
|Bending strength MPa||100～120|
|Modulus of elasticity for bending MPa||2000 ～3000|
|Notched Impact Strength(J/m)||60～100|
|Arc resistance sec||130～140|
|Specific volume resistance Ω·cm||1.83×1015|
Additional Color choices
We are able to provide full colors based RAL standard for your vast
demands . eg
More colors for plastic injection molded parts , please contact us