380V GRP Winding Production Line , Hige Precision Fiberglass
China hot sale Industrial Control Computer Glass Fiber Reinforced
Plastics Winding Machine
This machine is used wingding Glass Fiber Reinforced Plastics on
the tube. It features hige precision, high-productivity, low energy
consumption and simple installation & controlling,easy to
operate.the machine high popularity among the FRP industry.
This machien include three parts:
1. Main axle system.
The main axle is a constant torque motor, which is controlled by a
2. Winding cart.
The Winding cart uses AC servo motor to control the speed of its
walking back and forth.
3. Control system
Adopts industrial control computer, through the parameters set,
complete the whole process of automatic control.
Ⅱ. Technical parameters :
1. Main axle center height:1000mm
2. Speed of main axle:6.25-62.5r/min
3. Speed of winding cart:2.38-23.8r/min
4. Work piece length:1-2M
5. Work piece diameter:ø200
6. winding angle :4º-90º
7. Total Power:≈6KW
Ⅳ. Winding rule and line pattern
Ⅴ. Equipment Operation
Ⅵ. Taken the after-sales service and technical support
1. provide free technical guidance equipment installation and
2. equipment warranty for 12 months.
1. How do I know which is the right machine for me?
Just tell me what kind of product you want to make, and I will give
suggestions according to it.
2. How do I know the output range?
I will need size information (length, width, height) to calculate
the weight of the product. And give suggestions due to the products
3. How to get more information about the machine ?
Contact information is displayed below. I would give the answers
- Adopts industrial control computer,all-sigital control,good
expanding ability and entry
- All product parameters can be tuned or entered at will,simple &
- Fully automatic complete winding procedure
- Socket pipeline and various strengthening rings can be automatic
- Real-time tracking data show for operating trace & date
- Friendly human-computer interface,optional panel in both chinese
- Intelligent analysis if the failure,arbitrary winding on cut-off
- Fiber carriage system adopts AC servo control to ensure more steady
- Automatic shut-down after process completed
- Ring winding: The fiber wire gravitaxis along the main axle
rotation direction according to certain requirements. Each
rotation, move a yarn width, according to the circular, until the
fiber wire is wrapped up.
- Intercross winding:The main axle clockwise motion,the fiber wire
alternating motion along the main axle rotation direction according
to certain requirements,so product surface to achieve cross
winding,winding angle is 4º-90º.Then each fiber corresponds to a
cut-off point on the circumference,engaged in the same direction
without intersecting,different direction fiber will intersect.
- Put the winding cart, adjust the two parts in the same plane,
connected by bolts.
- Fiber wire rack is arranged in the 1.5 meters away from the car
- Main axle and the winding cart one meter apart, parallel to each
other,fixed by bolts.
- Two of the roller on the same side of the main axle,distance
according to the actual need to adjust
- Put glass fiber on the multilayer frame,through two fixed
plate,reach the feed roller,through the corresponding wire
groove,wrapped around the tube,pressed two lead screw.
- First,start the main axle, and then the winding cart. Adjust the
appropriate speed ratio according with the data of the wire
diameter, wire width and winding angle,etc.Then could to