Floating Copper Pin TC Box Mod Dual 18650 Battery YEP NTC 160W Temp
Parameters of Yep NTC mod 160W
|Item Name||Yep NTC 160W|
|Battery||2 x 18650 in series|
|Pin||Floating Copper Pin|
|Maximum output voltage||11V|
|Maximum output current||29.5A|
|Display||0.69 inch blue OLED screen|
|Wattage||7.0W-160.0W, increments 0.1W|
|Temperature||200F-600F/ 100℃-300℃ , increments 10F|
0.10-3.0 Ohm(normal atomizer)
0.08-1.0 Ohm(nickel 200 coil)
|Feature||Screen Reverse for left-hander|
Basic function of the Yep NTC mod 160W
1, Three buttons: The biggest one is the power button,the other two
are the adjusting buttons.
2, Battery Requirements: Put two 18650 batteries in the YEP NTC
160W, supply current is more than 29.8A.
3, 5 clicks in 2 seconds comes to working condition,the screen will
show“YEP”and change to show System “ON”after 2 seconds.
4, Output power adjustment:Press the “+” button one time,the output
power will add 1.0 W.
In the same way,the output power will reduce 1.0 W by pressing the
“-” button one time.Press the “+” and “-” buttons
at the same time for a while,it will come to the mode of power fast
5, Screen Reverse:Press the “+” and “-” button meanwhile, the
screen will reverse.
This function is designed for left-hander.
6, Lock the power:Press the power button and “-” button
meanwhile,the power will be locked/unlocked.
7, Lock the screen:If you want to save the power,Press the power
button and “+” button at the same time.
Protection of the Yep NTC mod 160W
1, Over puffing protection: when vaping over 10 seconds, the power
will be off compulsively,
OLED will show "long smoking".
2, Low-voltage protection: when the voltage is below 6.0 V, OLED
will show "low battery"
and the products need to be charged in time, since low battery
cannot support smoking normally.
3, 5 clicks the power button in 2 seconds, the screen will show
“System ON”,5 clicks in 2 seconds again,the
screen will show “System OFF”.
4, If there isn’t an atomizer attached to it,the screen will show
5, Reverse connection protection: when battery is put at wrong
it will not cause any damage to control panel with protection. Take
out the battery and put it in the
right direction, the product will work normally.
6, Short protection: when the resistance of the Atomizer is below
0.16 ohm, in order to avoid over- heating, the circuit will have a
protection automatically, the screen will show "Atomizer Short".
7, In the high-power working condition, when the voltage of the
battery get too low, and cannot support the
high output power,the battery's symbol on the screen will keep
"flashing". The system will adjust the output
power automatically to ensure the battery can be in normal use when
the voltage is over 6.0 V
Package content of YEP NTC 160W:
1 x Yep NTC 160W Mod
1 x Micro USB cable
1 x User manual
1 x Yep NTC 160W gift box